Anycubic PLA Glow Filament – Blue (Blue Glow)

Glows blue in the dark | Eco-friendly, heavy-metal-free luminescent material | Resilient and clog-free printing | Compatible with all 1.75 mm FDM printers | 1 kg spool

The Anycubic PLA Glow Filament in Blue (Blue Glow) is designed for FDM makers who want to add a striking luminescent effect to decorative prints — night lights, lampshades, holiday decorations, directional signs, and glow-in-the-dark figurines. A brief charge under sunlight activates up to two hours of continuous blue glow, while the eco-friendly luminescent material is completely free of heavy metals and radioactive particles. The filament prints reliably at 200–230 °C with a heated bed set between 60–70 °C and a recommended speed of 50–250 mm/s, suiting a wide range of FDM printers with a 0.4 mm or larger nozzle. Built to resist bending and tearing, it delivers consistent, clog-free results across decorative applications. Note: this product is available in old and new versions shipped randomly; slight colour variations between batches are possible, and the old-version filament is not recommended for use with the ACE Pro.

Features

• Glows blue continuously for up to 2 hours after a short charge under sunlight
• Eco-friendly luminescent material — free of heavy metals and radioactive particles
• Excellent resistance to bending and tearing for durable decorative prints
• Compatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle
• Supports intelligent identification when used with compatible Anycubic printers (new version)
• Reusable spool with threaded connection system reduces entanglement and filament scatter
• RoHS, REACH, and MSDS/SDS certified

Specifications

• Colour: Blue (Blue Glow)
• Size: 1kg
• Dry Out Before Use: Recommended
• Drying Condition: 60-65 ℃, 6-8 h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.4 mm or above
• Printing Temperature: 200-230 ℃
• Heated Bed Temperature: 60-70 ℃
• Recommended Printing Speed: 50-250 mm/s
• Cooling Time: 8 s
• Maximum Volume Speed (Flow Rate): 12 mm³/s
• Density: 1.26 g/cm³
• Melt Index: 9±1 g/10 min (190℃/2.16kg)
• Melting Point Temperature: 162 ℃
• Vicat Softening Temperature: 64℃
• Heat Deflection Temperature (0.45MPa): 55 ℃
• Young’s Modulus: 2200±100 MPa
• Tensile Strength: 50±3 MPa
• Elongation at Break: 13±3%
• Bending Modulus: 2700±50 MPa
• Bending Strength: 82±2 MPa
• lzod lmpact Strength (X-Y): 24±4 kJ/m²
• Tensile Strength (Z): 38±3 MPa
• Filament Type: Aesthetic filaments
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported
• Recommended to Print:
  • Decorative items with night time luminescence, such as night lights, lampshades, holiday decorations, luminous signs, directional signs, and glow-in-the-dark figurines

What’s in the Box

• Anycubic PLA Glow Filament – Blue (Blue Glow) x1